Source Code
! Copyright 2019 Khang Hoang Nguyen
!
! Permission is hereby granted, free of charge, to any person obtaining
! a copy of this software and associated documentation files
! (the "Software"), to deal in the Software without restriction,
! including without limitation the rights to use, copy, modify, merge,
! publish, distribute, sublicense, and/or sell copies of the Software,
! and to permit persons to whom the Software is furnished to do so,
! subject to the following conditions
!
! The above copyright notice and this permission notice shall be
! included in all copies or substantial portions of the Software.
!
! THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
! EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
! MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
! NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
! BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
! ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
! CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
! SOFTWARE.
!| author: Khang Hoang Nguyen
! license: <a href="https://github.com/kevinhng86/faiNumber-Fortran/blob/master/LICENSE">MIT</a>
! since: 1.0.0.f
!
! <p>This module, <code>fnDecimalUtil64</code> contains procedures for
! working with decimal strings and the int64 data type.
! </p>
!
! @note Unless stated otherwise, procedures of this module are pure
! procedures.
module fnDecimalUtil64
use fnConsts
use fnConsts64
implicit none
integer(k_int64), parameter :: dmax64 = 9_k_int64
integer(k_int32), parameter :: dmax32 = 9_k_int32
private :: dmax64, dmax32
contains
!| author: Khang Hoang Nguyen
! since: 1.0.0.f
!
! <p>Parse the `input` string as a signed decimal integer string
! to an int64 value.
!
! <p>This subroutine ignores leading and trailing whitespaces.
!
! <p>This subroutine considers an error to has occurred:<br>
! 1. If the `input` string only contains empty spaces.<br>
! 2. If the `input` string have a length of zero.<br>
! 3. If the value for either the `startpos` or `endpos` arguments
! is incorrect.<br>
! 4. If the `input` string contains a value that is smaller than
! the min value of the int64 data type or larger then the max
! value of the int64 data type.<br>
! 5. If the `input` string is not a valid signed decimal integer
! string.
! </p>
!
! @see <a href="|url|/page/startpos-endpos-explanation.html">
! startpos & endpos explanation</a>
pure subroutine decToInt64(input, output, error, startpos, endpos)
implicit none
character(len=*), intent(in) :: input !! A string to be parsed as a signed decimal integer string to an int64 value.
integer(k_int64), intent(out) :: output !! An int64 value of the <code>input</code> string if no error has occurred during parsing.
logical , intent(out) :: error !! A value of `.TRUE.` if an error has occurred during parsing, or `.FALSE.`, otherwise.
integer(k_int32), intent(in), optional :: startpos !! An int32 value of the position(inclusive) of where to start parsing.
integer(k_int32), intent(in), optional :: endpos !! An int32 value of the position(inclusive) of where to end parsing.
integer(k_int32) :: c, length, start, runlen, ch1
output = 0_k_int64 ; error = .TRUE.
length = len(input) ; start = 1
if ( present(endpos) ) then
if ( endpos < 1 ) return
if ( endpos < length ) length = endpos
end if
do while ( length > 0 )
if ( input(length:length) /= charspace ) exit
length = length - 1
end do
if ( present(startpos) ) then
if ( startpos > 1 ) start = startpos
end if
do while( start <= length )
if ( input(start:start) /= charspace ) exit
start = start + 1
end do
if ( start > length ) return
! Since ch1 is not going to be used in any equation, ch1
! can be int32 and can compare to int32 values. On the otherhand,
! output should be compared or process to values of int64.
! This is to avoid values from being up convert to int64
! multiple times or constant values from being up convert to
! int64.
ch1 = ICHAR(input(start:start))
if ( ch1 == cneg32 .OR. ch1 == cpos32 ) then
start = start + 1
if ( start > length ) return
end if
do while ( start <= length )
if ( input(start:start) /= charzero ) exit
start = start + 1
end do
runlen = (length + 1) - start
if ( runlen == 0 ) then
error = .FALSE.
return
end if
output = IEOR(ICHAR(input(start:start)), czero32)
if ( output > dmax64 ) return
start = start + 1
if ( runlen > 18 ) then
if ( runlen > 19 ) return
do while ( start < length )
c = IEOR(ICHAR(input(start:start)), czero32)
if ( c > dmax32 ) return
output = ISHFT(output, 1) + ISHFT(output, 3) + INT(c, k_int64)
start = start + 1
end do
c = IEOR(ICHAR(input(start:start)), czero32)
if ( c > dmax32 ) return
if ( output > 922337203685477579_k_int64 ) then
if ( output > 922337203685477580_k_int64 ) return
if ( c > 7 ) then
if ( c > 8 ) return
if ( ch1 /= cneg32 ) return
output = not(ISHFT(output, 1) + ISHFT(output, 3)) + 1_k_int64
output = output - INT(c, k_int64)
error = .FALSE.
return
end if
end if
output = ISHFT(output, 1) + ISHFT(output, 3) + INT(c, k_int64)
if ( ch1 == cneg32 ) output = not(output) + 1_k_int64
error = .FALSE.
return
end if
do while ( start <= length )
c = IEOR(ICHAR(input(start:start)), czero32)
if ( c > dmax32 ) return
output = ISHFT(output, 1) + ISHFT(output, 3) + INT(c, k_int64)
start = start + 1
end do
if ( ch1 == cneg32 ) output = not(output) + 1_k_int64
error = .FALSE.
end subroutine decToInt64
!| author: Khang Hoang Nguyen
! since: 1.0.0.f
!
! <p>Parse the `input` string as a signed decimal integer string
! to an int64 value.
!
! <p>This subroutine ignores leading and trailing whitespaces.
!
! <p>Error codes:<br>
! 0 - none <br>
! 1 - empty strings<br>
! 2 - invalid format<br>
! 3 - underflow<br>
! 4 - overflow<br>
! 5 - Invalid argument endpos/startpos
! </p>
!
! @note This subroutine may take longer on unsuccessful parse cases.
!
! @see <a href="|url|/page/startpos-endpos-explanation.html">
! startpos & endpos explanation</a>
pure subroutine decToInt64TrueError(input, output, error, startpos, endpos)
implicit none
character(len=*), intent(in) :: input !! A string to be parsed as a signed decimal integer string to an int64 value.
integer(k_int64), intent(out) :: output !! An int64 value of the <code>input</code> string if no error has occurred during parsing.
integer(k_int32), intent(out) :: error !! An int32 value of 0 on successful parse cases or a true error code on unsuccessful parse cases.
integer(k_int32), intent(in), optional :: startpos !! An int32 value of the position(inclusive) of where to start parsing.
integer(k_int32), intent(in), optional :: endpos !! An int32 value of the position(inclusive) of where to end parsing.
integer(k_int32) :: c, length, start, runlen, ch1
output = 0_k_int64 ; error = 0
length = len(input) ; start = 1
if ( present(endpos) ) then
if ( endpos < 1 ) goto 5
if ( present(startpos) ) then
if ( endpos < startpos ) goto 5
end if
if ( endpos < length ) length = endpos
end if
do while ( length > 0 )
if ( input(length:length) /= charspace ) exit
length = length - 1
end do
if ( present(startpos) ) then
if ( startpos > length ) goto 5
if ( startpos > 1 ) start = startpos
end if
do while( start <= length )
if ( input(start:start) /= charspace ) exit
start = start + 1
end do
if ( start > length ) goto 1
ch1 = ICHAR(input(start:start))
if ( ch1 == cneg32 .OR. ch1 == cpos32 ) then
start = start + 1
if ( start > length ) goto 2
end if
do while ( start <= length )
if ( input(start:start) /= charzero ) exit
start = start + 1
end do
runlen = (length + 1) - start
if ( runlen == 0 ) return
output = IEOR(ICHAR(input(start:start)), czero32)
if ( output > dmax64 ) goto 2
start = start + 1
if ( runlen > 18 ) then
if ( runlen > 19 ) goto 10
do while ( start < length )
c = IEOR(ICHAR(input(start:start)), czero32)
if ( c > dmax32 ) goto 2
output = ISHFT(output, 1) + ISHFT(output, 3) + INT(c, k_int64)
start = start + 1
end do
c = IEOR(ICHAR(input(start:start)), czero32)
if ( c > dmax32 ) goto 2
if ( output > 922337203685477579_k_int64 ) then
if ( output > 922337203685477580_k_int64 ) goto 11
if ( c > 7 ) then
if ( c > 8 ) goto 11
if ( ch1 /= cneg32 ) goto 4
output = not(ISHFT(output, 1) + ISHFT(output, 3)) + 1_k_int64
output = output - INT(c, k_int64)
return
end if
end if
output = ISHFT(output, 1) + ISHFT(output, 3) + INT(c, k_int64)
if ( ch1 == cneg32 ) output = not(output) + 1_k_int64
return
end if
do while ( start <= length )
c = IEOR(ICHAR(input(start:start)), czero32)
if ( c > dmax32 ) goto 2
output = ISHFT(output, 1) + ISHFT(output, 3) + INT(c, k_int64)
start = start + 1
end do
if ( ch1 == cneg32 ) output = not(output) + 1_k_int64
return
1 continue
error = 1
return
2 continue
error = 2
return
3 continue
error = 3
return
4 continue
error = 4
return
5 continue
error = 5
return
10 continue
do while ( start <= length )
if ( IEOR(ICHAR(input(start:start)), czero32) > dmax32 ) goto 2
start = start + 1
end do
11 continue
if ( ch1 == cneg32 ) goto 3
goto 4
end subroutine decToInt64TrueError
!| author: Khang Hoang Nguyen
! since: 1.0.0.f
!
! <p>Compare two strings as signed decimal integer strings by
! parsing them to int64 values first.
! </p>
!
! @see [[decToInt64]]
pure subroutine decCompareAsInt64(firstString, secondString, output, error)
implicit none
character(len=*), intent(in) :: firstString !! A string to be compared to the string <code>secondString</code>.
character(len=*), intent(in) :: secondString !! A string to be compared to the string <code>firstString</code>.
integer(k_int32), intent(out) :: output !! An int32 value of 1 if the `firstString` is larger than the `secondString`, 0 if they are both equal, or -1 if the `firstString` is smaller than the `secondString`. This value may not be a correct value if an error has occurred during parsing either one of the `input` strings.
logical , intent(out) :: error !! A value of `.TRUE.` if an error has occurred during parsing either one of the `input` strings. Otherwise, a value of `.FALSE.`.
integer(k_int64) :: n1, n2
logical :: e1, e2
output = 0 ; error = .FALSE.
call decToInt64(firstString, n1, e1)
call decToInt64(secondString, n2, e2)
if ( (e1 .eqv. .TRUE.) .OR. (e2 .eqv. .TRUE.) ) then
error = .TRUE.
return
end if
if ( n1 > n2 ) output = 1
if ( n1 < n2 ) output = -1
end subroutine decCompareAsInt64
!| author: Khang Hoang Nguyen
! since: 1.0.0.f
!
! <p>Compare two strings bases on the content of the strings
! reference to int64 values. If the strings are valid signed decimal
! integer strings that can be parsed to int64 values then they will
! be compared base on their int64 values. Otherwise, the strings
! will be compared base on the priority ranking order below.
!
! <p>This function return an int32 value of 1 if the `firstString`
! is larger than the `secondString`, 0 if they are both equal, or
! -1 if the `firstString` is smaller than the `secondString`.
!
! <p>Priority order ranking: (lo - hi)<br />
! 0 - invalid format<br />
! 1 - underflow<br />
! 2 - overflow<br />
! 3 - empty string (0 length or empty space)<br />
! 4 - valid int64
! </p>
!
! @see [[decToInt64TrueError]]
pure integer(k_int32) function decInt64OrSmaller(firstString, secondString) result(int32Out)
implicit none
character(len=*), intent(in) :: firstString !! A string to be compared to the string <code>secondString</code>.
character(len=*), intent(in) :: secondString !! A string to be compared to the string <code>firstString</code>.
integer(k_int64) :: n1, n2
integer(k_int32) :: e1, e2
int32Out = 0
call decToInt64TrueError(firstString, n1, e1)
call decToInt64TrueError(secondString, n2, e2 )
if ( e1 == 1 ) then
if ( e2 == 1 ) return
if ( e2 /= 0 ) then
int32Out = 1
else
int32Out = -1
end if
return
else if ( e2 == 1 ) then
if ( e1 /= 0 ) then
int32Out = -1
else
int32Out = 1
end if
return
end if
if ( e1 == 0 ) then
if ( e2 == 0 ) then
if ( n1 > n2 ) int32Out = 1
if ( n1 < n2 ) int32Out = -1
return
end if
int32Out = 1
return
else if ( e2 == 0 ) then
int32Out = -1
return
end if
if ( e1 > e2 ) int32Out = 1
if ( e1 < e2 ) int32Out = -1
end function decInt64OrSmaller
end module fnDecimalUtil64